Menu
The EasyCAP video-grabbing gizmo is cheap to buy, almost everywhere and adds a really useful functionality to your computer. Better yet, it works perfectly on Yosemite to allow you to capture game consoles, VHS video, DV tapes, etc., directly into your Mac using MP4.The EasyCAP DC60 is a cheap old school video capturing device which is perfect for capturing old school video sources. If you have a ton of old video tapes or have some old video game consoles you want to grab walkthrough videos from, this is one of the very best cost-effective ways to do that. In this article we show you how to get set up and a few tips on how to configure the sound and video for the best performance. For this test we will be using an old Ms Pac Man video game we found in the drawer.Cap Made EasyThe is a USB device with video and audio input sockets to capture and store video on your computer. First, you need to go get the driver for Mac OS X, and that.Installing the hardware is easy; just plug it into an available USB slot.
Wwwusbeasycapcom - China supplier of usb dvr, usb video capture, easy cap, easycap, video recorder. Best 4 Channel USB DVR Easycap Video Capture Factory. USB Video Grabber Creator Maker USB Ezcap DC60 Mac Easycap. 4 Channel USB DVR Stick Video Audio Capture Adapter. EasyCap USB Easy Cap DC60+ EzCap Video Capture Mac Ezcap USB video Capture Easycap DVR. Original China factory for usb easycap DC60 Video Capture Card Adapter USB DVR Ezcap USB Easy Cap DC60+ Easycap002 Easycap004 Vista XP Windows Win7 Mac Video Recorder ClimaxDigital Video Grabber Creator 4 channel 4ch video capture data collection easycap drivers driver software multiview ulead superdvr.
This needs to be a powered slot, so no dumb USB 1.0 hubs will do. Install and run the driver from the downloaded file, and if you haven’t plugged your EasyCAP into the computer, you will be advised to do so.Now all you have to do is plug the yellow composite Video Out of your device to the yellow video plug on the EasyCAP.Configuring EasyCAPIf it were that simple, then you could get started right away, but there are a couple of extra steps before you can play and record. First, you have to set the video standard. This test was conducted in a PAL country, the UK, but your mileage may vary.If you get a weird picture which seems black and white, fuzzy and weirdly offset on the screen, then it’s likely your video standard is not right.
You will spot the right one, even if you don’t know what your local standard is; just select one after the other and the screen will pop into colour when you have the right one.The next thing to set is the deinterlace. Old time video signals were interlaced, which doubled the amount of lines available by interlacing two frames and flicking rapidly between them. The downside to this was that it made the screen flicker.
These days we use progressive scan. You can combine the two images for smooth (ish) progressive images using the deinterlace setting. This is just trial and error on a case-by-case basis.
Just try each one to see which is the best fit.Finally, on the video side, you have to choose the source. This is effectively a choice between composite and SVHS or S-video.
S-video is a small 4 pin DIN connector, and you will only find these on certain video cards and S-VHS recorders, so for the most part you will be using the yellow composite video in.Sound is a separate issue. You can plug the sound into the white lead for mono or the white and red leads for stereo, but this didn’t work too well with the little Ms Pac Man for some reason, so in the end we added a small USB sound card and a phono to a 3.5 inch jack converter, and it worked perfectly. The cheap audio on the Ms Pac Man was really high, so we had to adjust the audio input which is available in the “Settings - Sound” section of the Mac Settings app. RecordingOnce you have a decent level on the sound, and you have the picture coming into the EasyCAP clearly and with the correct TV standard, you can record your video.Select “File - Start Recording” (Command + S), and you will be asked where you want to store the recording and what format to record in.
MP4 is better for the Mac, so that was our choice. To stop the recording select “File - Stop Recording.”There are other display options on the menu such as Fullscreen and aspect ratios. If you really want to squash the image and play it on full screen on 16:9, feel free to do so, but bear in mind what we said in. Hi guys, just to be clear, I’m not the developer of this software I just reviewed the device.You should email the developer and ask for updates, but I wouldn’t hold your breath.
The device is inexpensive and probably won’t be updated any time soon.For a variety of reasons I haven’t upgraded to Sierra yet, because I need to make sure that certain software I rely on will work properly first. When I do and if I find a patch or workaround, I’ll let you know. It sometimes takes a while for people to work around new OS versions so it’ll take a while. If I get any info I’ll let you know.Thanks for getting in touch!. Thanks for the thorough walkthrough. I’m eager to get moving here but am getting an error message at the first step. I’m running on Yosemite but even with the device plugged into the USB port, EasyCapViewer is telling me that “No supported capture hardware was found.”The error log reads:2017-01-05 05:21:33 +0000: USB Devices: (“(05ac:8006) Apple Inc.
– EHCI Root Hub Simulation”,“(05ac:8006) Apple Inc. – EHCI Root Hub Simulation”,“(05ac:8005) Apple Inc. – OHCI Root Hub Simulation”,“(05ac:8005) Apple Inc. – OHCI Root Hub Simulation”,“(0a5c:4500) Apple Inc. – BRCM2070 Hub”,“(05ac:8403) Apple – Internal Memory Card Reader”,“(05ac:023f) Apple Inc. – Apple Internal Keyboard / Trackpad”,“(05ac:821b) Apple Inc. – Bluetooth USB Host Controller”,“(534d:0021) MACROSILU01e0 U08ca –????”)Any advice for me?
Thanks again!. Hi Brandon,well the device works for me on Yosemite, but in my experience with “out of the way” software and hardware is that mileage may vary between users. Is the device plugged directly into one of the USB ports in your computer or is it in a hub? I think the device draws a little power from the USB to function and so needs to be either in a direct link to the computer (I used an USB extension cable to avoid having the device hanging off the back of the Mac) or in a powered USB hub. Other than that, it might need a couple of deinstalls and reinstalls before the device is properly recognised. This is not top quality hardware or software, that is clear, but if you can get it working on your system it’s a cheap and fucntional solution to the problem of grabbing Standard Definition video sources into your Mac.Good luck!Comments are closed.
Comments are closed.
|
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
January 2023
Categories |